Zarges 45131

Transport and storage containers from the K 475 range are high quality re-usable packaging. They are designed as protective packaging for sensitive assemblies and instruments.

K 475 re-usable containers with special foam fittings, holders and other additional fittings are available on request.

Details

• K 475 transport and storage containers in ruggedized and corrosion-proof aluminum according to TL 8115-0047.
• Stackable.
• Specially formed stacking corners.
• Seam-welded at joints, protection class IP 67.
• Lift-off lid with inner stiffening frame and continuous rubber seal in retaining channel.
• Stirrup catches.
• Spring loaded handles.
• Pressure relief valve and humidity indicator.
• RFI screening available.

Important notice: Clear diameter measurement for K 475 cases approx. 32 mm less than internal measurement (length and width). Special sizes on request. 

Details

• IP 67 protection class

• Pressure tightness
  Test to TL 8100-0005-2.4.2, overpressure 163 mbar ± 5 %, test duration 30 ± 1 min.

• Corrosion resistance
  Test to DIN 50 021 (salt spray test).
  Test duration 48 h. MIL-STD-810 E, Section 509.3, 24 hours.

• Stack loading test
  Test to TL 8100-0005-2.6, method 2.
  Test mass equals 6 m stacking, test duration 7 d.
  STANAG 4340, AEPP-3, Section 301, gross weight 724 kg/1596 lbs.

• Spring loaded handles
  Test to TL 8100-0005-2.5 (angle of lift max. 125°).
  Test force 1500 N/367 lbs each handle. Test dura tion 5 min.STANAG 4340, AEPP-3, Section 310, 181 kg/400 lbs per handle, 5 minutes in each case.

• Vibration test
  Test to DIN EN 28 318. Alteration of frequency of vibration table from 5 to 300 Hz and back to 5 Hz. Speed of alteration of frequency of 0.5 Oct/min. Acceleration amplitude of the table constantly 15 m/s2, 2 runs.

• Shock test
  Test to TL 8100-0005-2.9.1, vertical shock test (for cases without runners). Test according to TL 8100-0005-2.9.4 tipping test (for cases with runners).

Accessories

• Manometer
• VA coupling for filling with inert gas
• Foam linings
• Foam inserts to individual requirements
• RFI gasket
• Desiccant compartment
• Desiccant cartridges
• Decompression opening
• Pallet
• Shock indicators

• 
• 
• 
• 
•