Transport and storage containers from the K 475 range are high quality re-usable packaging. They are designed as protective packaging for sensitive assemblies and instruments.
K 475 re-usable containers with special foam fittings, holders and other additional fittings are available on request.
Zarges Case 45142 Details
	- K 475 transport and storage containers in ruggedized and corrosion-proof aluminum according to TL 8115-0047.
 
	- Stackable.
 
	- Specially formed stacking corners.
 
	- Seam-welded at joints, protection class IP 67.
 
	- Lift-off lid with inner stiffening frame and continuous rubber seal in retaining channel.
 
	- Stirrup catches.
 
	- Spring loaded handles.
 
	- Pressure relief valve and humidity indicator.
 
	- RFI screening available.
 
Important notice: Clear diameter measurement for K 475 cases approx. 32 mm less than internal measurement (length and width). Special sizes on request. 
Details
	- Pressure tightness
	Test to TL 8100-0005-2.4.2, overpressure 163 mbar ± 5 %, test duration 30 ± 1 min. 
	- Corrosion resistance
	Test to DIN 50 021 (salt spray test).
	Test duration 48 h. MIL-STD-810 E, Section 509.3, 24 hours. 
	- Stack loading test
	Test to TL 8100-0005-2.6, method 2.
	Test mass equals 6 m stacking, test duration 7 d.
	STANAG 4340, AEPP-3, Section 301, gross weight 724 kg/1596 lbs. 
	- Spring loaded handles
	Test to TL 8100-0005-2.5 (angle of lift max. 125°).
	Test force 1500 N/367 lbs each handle. Test dura tion 5 min.STANAG 4340, AEPP-3, Section 310, 181 kg/400 lbs per handle, 5 minutes in each case. 
	- Vibration test
	Test to DIN EN 28 318. Alteration of frequency of vibration table from 5 to 300 Hz and back to 5 Hz. Speed of alteration of frequency of 0.5 Oct/min. Acceleration amplitude of the table constantly 15 m/s2, 2 runs. 
	- Shock test
	Test to TL 8100-0005-2.9.1, vertical shock test (for cases without runners). Test according to TL 8100-0005-2.9.4 tipping test (for cases with runners). 
Accessories
	- Manometer
 
	- VA coupling for filling with inert gas
 
	- Foam linings
 
	- Foam inserts to individual requirements
 
	- RFI gasket
 
	- Desiccant compartment
 
	- Desiccant cartridges
 
	- Decompression opening
 
	- Pallet
 
	- Shock indicators